Belt Tensions
Belts Stretch over their lifespan. Therefore, belts should be checked periodically for proper tension and alignment, especially when the mill is first used or if new belts are installed.
How to Adjust the Tension and Alignment
-
To maximize v-belt life and optimize your machine’s performance make sure the proper belt tension is maintained.
-
Adjust belt tension only when your rolls are in the position that they run the majority of the time
-
V-Belts should be tensioned only as tight as required to prevent belts from slipping. If the belts start to slip, simply tension more. But DO NOT over tighten the belts!
-
If the belts are over tensioned, it may result in shaft failure or motor failure.
-
Lastly, to ensure the best performance out of your belts, and the longest life, you must make sure they are operating within the recommended load limitations. You must monitor the motor amps while the machine is in operation to ensure the work is being evenly distributed between your sets of rolls.
Warning:
Never remove the belt guard while the machine is in operation!
For additional information see our YouTube video! How to set belt tension on your Roller Mill